===================================================================== License Agreement for DocuCentre Color f450/f360/f250/a450/a360/a250 ===================================================================== 1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual property rights in the SOFTWARE shall remain in Fuji Xerox and its third party suppliers. You have no rights in the SOFTWARE except as expressly granted in accordance with this agreement. 2. LICENSE: Under this agreement, you are granted a non-exclusive license to use the SOFTWARE for the purpose of using with compatible Fuji Xerox products in Japan. You are not permitted to (1) assign, sublicense, sell, rent, lease, convey, or transfer the SOFTWARE to any third party by any tangible media such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a network or by a telephone line available to the public or (3) alter, modify, decompile, disassemble, reverse engineer, or create derivative works based on the whole or any part of the SOFTWARE. If any direction on usage or restriction for the SOFTWARE is expressly specified in this web site, you are required to follow such direction. 3. TERM: This agreement is effective upon installing the SOFTWARE until you terminate the agreement by destroying the SOFTWARE. This agreement will also terminate if you fail to abide by any terms of this agreement. In case of termination, you must promptly destroy the SOFTWARE. 4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE. IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE. 5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part or whole, directly or indirectly, in violation of any restrictions, laws or regulations imposed by the government of Japan or any other relevant countries, and are required to obtain necessary approval prior to exporting the SOFTWARE. ===================================================================== Additional Information: DocuCentre Color f450/f360/f250/a450/a360/a250 Windows NT(R) 4.0 Printer/Direct Fax Driver Ver. 2.5.62 ===================================================================== This document provides information about the printer driver on the following items: 1. Requirements 2. File Configuration 3. Installation 4. Version Improvements 5. Limitations 6. Inquiries ---------------- 1. Requirements ---------------- 1. Please note that this printer driver operates on a computer with a 32-bit x86-based microprocessor (Intel 80486/25 and above) and an upward-compatible processor, running Windows NT (R) 4.0 English version. (For clock speed of the CPU and memory, make sure that the system configuration is recommended by the operating system.) 2. If you encounter any problems, we recommend that you install Windows NT(R) 4.0 Service Pack 6 or later. This may solve the problem. 3. This printer driver works correctly with the combinations of the below mentioned printer software versions. * DocuCentre Color f450 Controller ROM Version 1.0.0 or later * DocuCentre Color f360 Controller ROM Version 1.0.0 or later * DocuCentre Color f250 Controller ROM Version 1.0.0 or later * DocuCentre Color a450 Controller ROM Version 1.0.0 or later * DocuCentre Color a360 Controller ROM Version 1.0.0 or later * DocuCentre Color a250 Controller ROM Version 1.0.0 or later -------------------- 2. File Configuration -------------------- fxlkuj.cd_ fxlkuj.cfg fxlkuj.cn_ fxlkuj.hl_ fxlkuj.xr_ fxlkujdm.dl_ fxlkujf.cn_ fxlkujf.hl_ fxlkujf1.dd_ fxlkujf2.dd_ fxlkujf3.dd_ fxlkujf4.dd_ fxlkujf5.dd_ fxlkujf6.dd_ fxlkujh.inf fxlkujhk.dl_ fxlkujhm.dl_ fxlkujhr.xr_ fxlkujhu.dl_ fxlkujhv.dl_ fxlkujm1.dd_ fxlkujm2.dd_ fxlkujm3.dd_ fxlkujm4.dd_ fxlkujm5.dd_ fxlkujm6.dd_ fxlzcomp.dl_ fxlzfcs1.fx_ fxlzfqw.dl_ fxlzfqw.xr_ fxlzfqwp.dl_ fxlzjnie.dl_ fxlznie1.dl_ fxzadcmn.dl_ fxzarl32.dl_ fxzc4502.dl_ fxzddmif.dl_ fxzdhb32.dl_ fxzpmc2.dl_ readme.txt ---------------- 3. Installation ---------------- You can install this driver by downloading from our web site. These methods of installation are described below. Important ---------- * Close all the running applications before installing the printer driver. * Always reboot the computer after installing an upgraded version of the printer driver. * If you have deleted an older version of the printer driver, always reboot the computer before installing the new version. * The installation procedures are written with the assumption that standard settings have been configured in Windows. The procedures may differ if the start menu or folder options have been changed. * Installation may not be successful if this driver is not installed using the following procedure. *** Installation from downloaded data via the web site You can download the latest driver from our web site. Refer to "6. Inquiries" for our web site address (URL). Communication charges will be borne by the customer. Please download the following: 1) Double-click the downloaded compressed file (.exe format) to decompress. 2) Click the "Start" button. Point to "Settings" and click "Printers". Double-click the "Add Printer" icon. 3) Specify the printer connection. * For a local printer: Select "Local printer". Proceed to step 4). * For a network printer: Select "Network printer" and click the "Browse" button. Specify the desired printer from the network. Contact the network administrator if you have any queries. If other printers are installed, a message asking whether to set this as the default printer is shown. Click "Yes" if you want to set it as a default printer. Proceed to step 11). 4) Specify the port to be used for the printer. Create a port if there is no output port. Please refer to the "Frequently Asked Questions" from our driver download page for the port creation method. For our URL web page, please refer to "6. Inquiries". 5) Click "Have Disk" from the "Add Printer Wizard" screen. An "Install From Disk" screen is displayed. Specify the directory containing the uncompressed files in step 1) in the "Copy manufacturer's files from" box. Click "OK". 6) A list of printers is displayed. Select the desired printer. If the selected printer is already installed, a message asking whether to replace the existing driver is displayed. When installing a new version of the printer driver, select "Replace existing driver". The older version of the driver cannot be deleted if it is used in an application. In this case, close the application. Note: The following printers will be listed. Select the correct printer driver. "FX DocuCentre Color f450" Print driver for DocuCentre Color f450 "FX DocuCentre Color f360" Print driver for DocuCentre Color f360 "FX DocuCentre Color f250" Print driver for DocuCentre Color f250 "FX DocuCentre Color a450" Print driver for DocuCentre Color a450 "FX DocuCentre Color a360" Print driver for DocuCentre Color a360 "FX DocuCentre Color a250" Print driver for DocuCentre Color a250 "FX DocuCentre Color f450 FAX" Direct Fax driver for DocuCentre Color f450 "FX DocuCentre Color f360 FAX" Direct Fax driver for DocuCentre Color f360 "FX DocuCentre Color f250 FAX" Direct Fax driver for DocuCentre Color f250 "FX DocuCentre Color a450 FAX" Direct Fax driver for DocuCentre Color a450 "FX DocuCentre Color a360 FAX" Direct Fax driver for DocuCentre Color a360 "FX DocuCentre Color a250 FAX" Direct Fax driver for DocuCentre Color a250 7) A dialog box for specifying the printer name is displayed. To change the printer name, enter any name in the "Printer name" box. If other printers are installed, a message asking whether to set this as the default printer is shown. Click "Yes" if you want to set it as a default printer. 8) Specify whether to share this printer with other network users. 9) A dialog box specifying whether to print the test page after installation is shown. 9a) To perform test printing on the print driver, load letter paper to the printer, select "Yes" and then "Next". Select "No" and click "Next" if you do not wish to print the test page. 9b) In the case of direct fax driver, the test page will also be faxed. Normally, "No" is selected. Select "Yes" if you want to fax the test page. The "Set / Check Fax Transmission" dialog box will be displayed. Specify the recipient and click "Next" after faxing. Select "No" and click "Next" if you do not wish to print the test page. 10) The necessary files are copied and a new printer icon is created. If you have printed the test page, a printer test result confirmation message is displayed. This completes the installation. Next, we set the installed printer options. 11) Click the printer icon. 12) From the "Printer" menu, click "Properties". 13) Click the "Options" tab. Perform the setting when the "Options" tab is displayed. If an ICC profile is required for an user application ------------------------------------------------------ If an ICC profile of this printer is required for an user application and if printing is via this printer driver, use the following ICC profile. DocuCentre Color f450 "fxlkujm6.icm" DocuCentre Color f360 "fxlkujm5.icm" DocuCentre Color f250 "fxlkujm4.icm" DocuCentre Color a450 "fxlkujm3.icm" DocuCentre Color a360 "fxlkujm2.icm" DocuCentre Color a250 "fxlkujm1.icm" ------------------------ 4. Version Improvements ------------------------ This section describes the modifications made for each upgraded version. [Improvements from Ver 2.5.6] * Improved the occurrence of not printing according to the Print properties specified when printing from PowerPoint 2002/2003. * Changed the textual information when "Always Use TrueType Font" is selected. * Supported "Finisher C". * Added "NumColor Value" feature. [Improvements from Ver 2.5.21] * Improved the problem where the macro processing of Excel is delayed when "Set as Default Printer" is selected. * Improved the problem where print jobs cannot be printed with a specific application on MetaFrame(R). * Improved the problem where the color of some parts of the image is discontinued when "Image Auto Correction" is used from specific applications. [Improvements from Ver 2.5.33] * Improved the problem that specified Offset Stacking was not reflected. * Improved the phenomena where the Collated setting was not reflected correctly when printing from specific applications. * Improved the situation where second and subsequent items are transmitted via G3 instead of G4, which is set as the default, during Broadcast Send using Direct Fax driver. * Improved the occurrence of not reflecting paper specification correctly through the setting of "Change Paper Information Handling". [Improvements from Ver 2.5.44] * Improved the phenomena where specified copies were not reflected correctly when printing from a specific application. * Improved the phenomena where unintended search results are displayed on the [Look Up Phonebook] dialog box of the Direct Fax Driver. * Improved the phenomena where some of the recipients selected from the [Phonebook List] are not added on the [Look Up Phonebook] dialog box of the Direct Fax Driver. * Improved the phenomena where the grouping in [Show] is not displayed correctly on the [Look Up Phonebook] dialog box of the Direct Fax Driver. * Improved the occurrence of not reflecting paper specification correctly through the setting of "Change Paper Information Handling". * Improved the problem where print errors occurred when using EMF Spooling. * Improved the problem that [Detailed User Settings] of the user may be applied to other users using the same printer if [Standard Settings] is configured on the shared printer. * Improved the phenomena where specific characters cannot be printed correctly when font substitution is set. * The selected results of [Phonebook File] can now be stored when the Direct Fax Driver dialog is opened from an application. * Changed the textual information when "Always Use TrueType Font" is selected. * Improved the phenomena where printing cannot be performed from a specific application. * Improved the phenomena where font substitution for bold text and italic text cannot be made correctly. * Rectified the problem that a new registry entry may be created at each log in when using ACCP (Auto Created Client Printer) by MetaFrame(R). [Improvements from Ver 2.5.56] * Improved the problem that specified paper source from application may be ignored after changing [Ignore Application Paper Source Settings]. * Improved the phenomena where Direct Fax transmission cannot be sent from a specific application. * Rectified the problem of abnormal termination and hung-up of the application when loading/unloading print driver. * Improved the performance of printing when specifying unsupported trays in specific application. * Rectified the problem in printing the layout of booklet printing correctly. * Rectified the problem in printing graphics in documents correctly when printing from specific applications. [Improvements from Ver 2.5.60] * Fixed the problem that settings of "Header / Footer Options" may be changed to default. ---------------- 5. Limitations ---------------- ============================ Driver-Specific Limitations ============================ When installing multiple drivers to a single SMB port ====================================================== When installing multiple drivers to a single SMB port, follow the procedure mentioned below. 1) Double-click the "Add Printer" icon to display the "Add Printer Wizard" screen. Activate the "Add Printer Wizard" and click "Next". 2) Select "Local Printer" and click "Next". 3) Select the SMB port to be connected from "Available ports" and click "Next". 4) Double-click "Have Disk", specify the folder in which you have saved the driver and carry out the installation as per the instructions. Shared Printer =============== When printing via a shared printer on Windows NT (R) 4.0, if the printer is using the LPR port and "Spool print documents so program finishes printing faster" on the "Advanced" tab is selected, please specify "Start printing after last page is spooled". If you select "Start printing immediately", the results may be different from the screen. Number of Copies ================= This driver allows you to print from 1 to 999 copies. Only one copy will be printed if the number of copies specified exceeds this range. Watermark Printing =================== When performing watermark printing with "Transparent" specified, some of the colors that appear on the screen may be different when actually printed. Print Booklet and Print Header/Footer functions ================================================ When the page number printing is simultaneously specified for Print Booklet function and Print Header/Footer function, the page numbers may not be printed properly. Limitations during EMF Spooling ================================ When the "EMF Spooling" on the "Detailed Settings" tab is set to "On", the following functions may not operate properly. When using these functions, set the "EMF Spooling" to "Off". * Print Header/Footer * Secure Print * Sample Print * Create Forms (Register Forms and Print Overlay will operate properly.) * E-mail Job Confirmation * Use Document Monitor * Specify Job Owner * Use Extended Features From Application * Specify Margin Printing Huge Print Data ========================= For some applications, if a pasted image is printed at high resolution, the print data expands and may result in an extremely slow printing speed. The print data size of the output may be improved by changing the following settings of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. * Change "Resolution". * Change "Image Compression". Black/Color Auto Recognition ============================= When "Color (Auto)" is specified at "Output Color", though the output may appear to be in black, it has been processed in color. If you are sure that you want to print in black, specify "Black" at "Output Color". Documents will be printed in color in the following situations. * When black and white objects are overlapping the color objects * When there are color objects outside the print area * When the application uses the system's ICM function to perform color change * When the application has its own color change function Skip Blank Pages ================= Even with "Skip Blank Pages" selected, blank pages may still be printed in the following situations. * The page contains only line feeds. * The page contains only spaces. * The page contains only line feeds and spaces. * A white background drawing instruction is sent from the application. Fax Phonebook File on the Fax tab ================================== It is recommended to set the "Fax Phonebook File" on the "Fax" tab beforehand, using the following way: * Open the printing preferences from the printer folder and click "OK" after selecting the settings. Also, if settings are made on the driver properties screen displayed from the application, normally they will be cleared when the application is closed. If the settings are made on the "Set / Check Fax Transmission" dialog, they will be cleared whenever printing is executed. Font Substitution ================== If a size equal or larger than 36 points is specified, the document may be printed with incorrect font substitution. Missing Items in the Printout ============================== In some applications, images may be missing in the printout. If this happens, activating EMF spooling as shown below may remove the problem. * Set "EMF Spooling" to "On" on the "Detailed Settings" tab. "Stop Sending" button on the "Set / Check Fax Transmission" dialog =================================================================== When you cancel a print job in progress from the driver, the application may display a warning dialog. It may indicate a printer error message, although there is no error in the printer. In this case, ignore the warning message and continue operation. Specifying Secure Send, F Code and Password ============================================ When "Use Same Cover Sheet for Multiple Recipients" is checked, the Secure Send, F code and Password features will be disabled if multiple recipients are specified in the "Recipients List". Connecting to un-spooled SMB port ================================== Transmission cannot be done properly when "Use Same Cover Sheet for Multiple Recipients" is unchecked and multiple recipients are selected from the "Recipients List" if the printer is connected to an un-spooled SMB port. This problem may be avoided by setting the SMB port to spool or using other ports except SMB port at the printer. Custom Paper Size ================== Administrator rights are necessary for changing the setting of Custom Paper Size. Favorites ========== When only a margin setting is changed, "Change" is not displayed in the "Favorites" combo box. Printer Error ============== An error may occur at the printer if one of the following situations occurs during printing. Follow the instructions on the printer UI or the user guide to resolve the error. * Driver properties from the application program are not displayed. * Printer settings on the application program are not reflected in the driver properties when displayed. * Printer settings are changed midway in a document. (E.g. document which has different paper sizes for every page.) * Continuous printing from multiple application programs. * When an optional device that was not installed to the printer was specified at the "Options" tab. Compatibility with Printer Font ================================ If a document using the printer fonts of other machine models is printed through this driver, then the results of printing will be different. Print Overlay ============== The alphabetical "Form Name" specified in the "Print Overlay" is case sensitive. Specify the correct case sensitive form name registered in the printer. As some applications paint the background in white to print, forms with overlay may be hidden. Such applications include Internet Explorer and WordPad. Paper sizes supported by Tray 5 (Bypass Tray) ============================================== If the paper length is smaller than 140mm, printing may not be carried out properly. Save to Mailbox =============== To use the "Save to Mailbox" feature, a mailbox must be registered in advance on the printer. Refer to the machine user guide on how to register mailboxes. On FX DocuCentre Color a450/a360/a250, "Save to Mailbox" is available only when the scanner kit has been installed. =================== Client Environment =================== Multi-language Document ======================== If a multi-language document is created using the multi-language support function, you should select "Always Use TrueType Fonts" on the "Fonts" dialog box before printing. When printing with printer fonts, non-Japanese texts such as Greek, Croatian, etc. may be printed incorrectly. ================================= Application-Specific Limitations ================================= All Applications ================= * Depending on the application used by the customer, blank pages for page adjustment will be inserted automatically according to the conditions like the number of copies specified when outputting 2-sided prints. In this case, the blank inserts will be included by the application. The performance is improved by changing the setting below. - Check "Skip Blank Pages" on "Advanced Settings" tab. * The print layout may be changed when you change the "Resolution" of this driver. * In some applications, when the line width is set to thin lines, the selected dotted lines may be printed as solid lines instead. If this happens, select another line width. * When printing documents with image data such as photos, the processing time may increase. In such case, the processing time can be reduced by setting the "Image Compression" option of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab to "Photo". * When garbage text is printed, select "Always Use TrueType Fonts" from the "Fonts" tab when printing. * When text is not printed clearly, it can be improved by changing the following setting. * Change the "Print Mode" from the "Graphics" tab. * When a printed pattern or diagram is different from what you see on the screen, changing the following settings of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab may alleviate the problem. * Uncheck the "High Speed Image Processing". * Check the "Gray Guaranteed" check box. * Check the "Draw the pattern with fine lines as per the resolution" check box. * Change "Resolution". You can also improved the problem by changing the following setting: * Change the "Print Mode" at the "Graphics" tab. * Change the "Image Adjustment Mode" at the "Graphics" tab. * Change the "Brightness" and "Contrast", "Chroma" at the "Image Settings" tab of the "Graphics Properties" dialog box. * The print result may overlap if Multiple-Up is selected when printing a document that has exceeded the print area of the printer driver. * If the Long Paper document is not printed as shown on the screen, it may be improved by setting the "Resolution" to "300dpi" or "200dpi". * The following settings may solve the problem of not reflecting paper specification from application correctly. * Change the setting for "Change Paper Information Handling". * If a printed pattern or diagram is different from what you see on the screen, you can improve the result by changing the following settings in "Other Settings (Graphics Settings)" of the "Detailed Settings" tab. * Set "Halftone Print" to "Off". Adobe(R) Acrobat(R) ==================== Adobe(R) Reader(TM) ==================== Changing the following settings may improve the printing result if the printed output is different from what you see on the screen. * Check the "Print Image" at the print dialog box of the application before printing. When printing a PDF file containing mixed sizes such as A4 portrait and A3 landscape, the printer driver is unable to separate and print pages of different sizes onto different paper in a single operation. To print on different paper sizes, separate the pages of different sizes into different print operations. To fit a mixed-size print output to a single paper size in a single print operation, select "Reduce" on the "Print" dialog box. For example, you can rotate and reduce an A3 landscape page to be printed on an A4 portrait paper. "Turn Image by 180deg" setting will not be reflected on the output result. Adobe(R) Illustrator(R) 9.0 ============================ "Paint" and "Lines" areas specified in the text may be printed incorrectly if printer fonts are used. If this happens, specify "Always Use TrueType Fonts" on the "Fonts" tab in the printer driver. Adobe(R) PageMaker(R) ====================== Images pasted at a tilted angle may be printed with dotted line grids. CorelDRAW(R) ============= If a printed pattern or diagram is different from what you see on the screen, you can improve the result by the following settings. * Change "Print Mode" in the "Graphics" tab. * Change the following settings in "Other Settings (Graphics Settings)" in the "Detailed Settings" tab. - Set "Halftone Print" to "On". - Set "Paint Only Enclosed Areas" to "On". Corel(R) Designer(TM) ====================== Objects that are drawn in solid lines may be printed in dotted lines. The print output may not look good, for example, lines and gaps may be seen in circle gradations. The print output may be improved by converting the gradations to images. JUSTSYSTEM(R) Ichitaro(R) ========================== Sometimes the partial printing may not be performed properly. Such cases can be avoided by the following method. * Before starting the application, open the default setting of the document from the Printer Folder and click "OK". Micrografx(R) Designer(TM) 7.0J ================================ Objects that are drawn in solid lines may be printed in dotted lines. The print output may not look good, for example, lines and gaps may be seen in circle gradations. The print output may be improved by converting the gradations to images. Microsoft(R) Excel =================== When printing a book or multiple sheets in Excel, the second and subsequent sheets may not be printed as specified in the dialog settings. When you specify to print an entire book with mixed double-sided and single-sided sheets, each sheet is printed according to its individual print information. Batch printing is not performed. You can avoid this problem by doing the following: 1. Select another printer on the print dialog or page setup dialog of any sheet and close the document temporarily to activate the change. 2. Change the default value of the driver to the desired setting. (E.g. 2 Sided Print, 2 Up, etc.) 3. Open the document and select this driver on the print dialog before printing. The print layout may be changed when you change the "Resolution" of this driver. When sending a fax document as a book or in multiple sheets in Excel, the document may be faxed as per sheet as instructed by Excel. In this case, select "Start Sending" after checking each setting on the "Set/Check Fax Transmission" dialog which will be displayed more than once. Please note that jobs with the "Stop Sending" button selected will not be faxed. Microsoft(R) Internet Explorer =============================== When the output of the image data is different from what you see on the screen, use the following method to resolve. * Change the "Resolution" setting of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. If a Web page containing Excel document is printed in multiple parts, you can rectify the problem using the following methods. 1. Quit Internet Explorer. 2. Open printer properties in the Printers folder. 3. Switch "Apply Zoom to Application" to "Off" in the items list of "Other Settings (Graphics Settings)" in the "Detailed Settings" tab. Microsoft(R) PowerPoint(R) =========================== Depending on the font (e.g. MS-Mincho) and point size specified for a piece of text, the underscore (_) and the underline may overlap in the print output. Even if the overlap is not apparent because of the screen display ratio, the underscore (_) and the underline may overlap on the print output. When the output in black is different from what you see on the screen, use the following method to resolve. * Check the "Grayscale" on the Print dialog of the application and print. Microsoft(R) Visio(R) ====================== Setting the following will improve the problem of printing subsets of various sizes in which is different from the specified "Paper Size" in "Basic" tab. * Set "Change Paper Information Handling" to "On" on the "Detailed Settings" tab. Microsoft(R) Word ================== Even if "Skip Blank Pages" is specified, when a blank page is included in documents, it may be output. When "Poster" is selected to print two or more copies of a single-page document, the copies will not be collated. Lotus(R) Freelance(R) ====================== Some of the settings such as paper source, print mode in the printer properties may not be reflected in the output. PCA(R) Account EX-V ==================== The recipient cannot be set if the direct fax driver is selected from the Printer Settings dialog box. Fuji Xerox DocuWorks(TM) ========================= When printing a mixed size document, the printer may not be able to switch between different output paper sizes. Such cases can be avoided by the following method. * Display the "Printer Settings" dialog box using the "File"> "Printer Settings" menu. * Specify "Auto" from "Paper Source". If the direct fax driver is used as an easy printer, the recipient specified at the properties will be disabled. Specify the recipient on the "Set / Check Fax Transmission". In Ver 5.x or earlier, please note that if easy printer of a FAX model is created from Properties on the "Printer Settings" screen, the address last specified may be retained when sending a fax. -------------- 6. Inquiries -------------- Fuji Xerox Co., Ltd. Customer Support Center Please check the telephone number to call on the "Maintenance/Operation Inquiries" card pasted on the machine. The latest software is available on our web site. http://download.fujixerox.co.jp/ Communication charges will be borne by the customer. "Microsoft", "PowerPoint", "Windows", "Windows NT" are registered trademarks of Microsoft Corporation, U.S.A. in the United States and other countries. Adobe, Adobe Illustrator, Adobe Acrobat, PageMaker and Adobe Reader are trademarks of Adobe Systems Incorporated. "Corel DESIGNER" is trademark or registered trademark of Corel Corporation. Other company names and product names are trademarks or registered trademarks of the respective companies. This software is based in part on the work of the Independent JPEG Group.