===================================================================== License Agreement for DocuPrint C3540/C3140/C3250 ===================================================================== 1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual property rights in the SOFTWARE shall remain in Fuji Xerox and its third party suppliers. You have no rights in the SOFTWARE except as expressly granted in accordance with this agreement. 2. LICENSE: Under this agreement, you are granted a non-exclusive license to use the SOFTWARE for the purpose of using with compatible Fuji Xerox products in Japan. You are not permitted to (1) assign, sublicense, sell, rent, lease, convey, or transfer the SOFTWARE to any third party by any tangible media such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a network or by a telephone line available to the public or (3) alter, modify, decompile, disassemble, reverse engineer, or create derivative works based on the whole or any part of the SOFTWARE. If any direction on usage or restriction for the SOFTWARE is expressly specified in this web site, you are required to follow such direction. 3. TERM: This agreement is effective upon installing the SOFTWARE until you terminate the agreement by destroying the SOFTWARE. This agreement will also terminate if you fail to abide by any terms of this agreement. In case of termination, you must promptly destroy the SOFTWARE. 4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE. IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE. 5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part or whole, directly or indirectly, in violation of any restrictions, laws or regulations imposed by the government of Japan or any other relevant countries, and are required to obtain necessary approval prior to exporting the SOFTWARE. ===================================================================== Additional Information: DocuPrint C3540/DocuPrint C3140/DocuPrint C3250 Windows(R) 95 Printer Driver Ver. 2.5.58 ===================================================================== This document provides information about the printer driver on the following items: 1. Requirements 2. File Configuration 3. Installation 4. Version Improvements 5. Limitations 6. Inquiries ---------------- 1. Requirements ---------------- 1. Please note that this printer driver operates on a computer running Microsoft(R) Windows(R) 95 English version. (For clock speed of the CPU and memory, make sure that the system configuration is recommended by the operating system.) 2. This printer driver works correctly with the combinations of the below mentioned printer software versions. * DocuPrint C3540 Controller ROM Version 1.0.0 or later * DocuPrint C3140 Controller ROM Version 1.0.0 or later * DocuPrint C3250 Controller ROM Version 1.0.0 or later Important ----------- * To update the printer standard ROM version, please download the firmware from the web site listed in "6. Inquiries". ---------------------- 2. File Configuration ---------------------- fxljredm.dl_ fxljrj.cd_ fxljrj.cfg fxljrj.cn_ fxljrj.hl_ fxljrj.xr_ Fxljrjb.inf fxljrje.dr_ fxljrje.tb_ fxljrjer.xr_ fxljrjeu.dl_ fxljrjp1.dd_ fxljrjp2.dd_ fxljrjp3.dd_ fxlzalif.dl_ fxlzalla.dl_ fxlzcmi3.dl_ fxlzcmif.dl_ fxlzcomp.dl_ fxlzenie.dl_ fxlznie1.dl_ fxlzniif.dl_ fxlzrscv.dl_ fxlzrvif.dl_ fxlzuiif.dl_ fxz35402.dl_ fxzadcmn.dl_ fxzarl32.dl_ fxzddmif.dl_ fxzdhb32.dl_ fxzjpeg.dl_ fxzpdr32.dl_ fxzpmc2.dl_ readme.txt ----------------- 3. Installation ----------------- You can install this driver by downloading from our web site. These methods of installation are described below. Important ---------- * Close all the running applications before installing the printer driver. * Always reboot the computer after installing an upgraded version of the printer driver. * If you have deleted an older version of the printer driver, always reboot the computer before installing the new version. * The installation procedures are written with the assumption that standard settings have been configured in Windows. The procedures may differ if the start menu or folder options have been changed. * Installation may not be successful if this driver is not installed using the following procedure. *** Installation from downloaded data via the web site You can download the latest driver from our web site. Refer to "6. Inquiries" for our web site address (URL). Communication charges will be borne by the customer. 1) Double click the downloaded compressed file (.exe format) to uncompress. 2) Click the "Start" button. Point to "Settings" and click "Printers". Double click the "Add Printer" icon. 3) Specify the printer connection. * For a local printer: Select "Local printer". For parallel printing, select "Local printer". * For a network printer: Select "Network printer" and click the "Browse" button. Specify the desired printer from the network. Contact the network administrator if you have any queries. 4) Click "Have Disk" from the "Add Printer Wizard" screen. An "Install From Disk" screen is displayed. Specify the directory containing the uncompressed files in step 1) in the "Copy manufacturer's files from" box. Click "OK". 5) A list of printers is displayed. Select the desired printer. If the selected printer is already installed, a message asking whether to replace the existing driver is displayed. When installing a new version of the printer driver, select "Replace existing driver". The older version of the driver cannot be deleted if it is used in an application. In this case, close the application. Note: The following printers will be listed. Select the correct printer driver. "FX DocuPrint C3540" Printer driver for DocuPrint C3540 "FX DocuPrint C3140" Printer driver for DocuPrint C3140 "FX DocuPrint C3250" Printer driver for DocuPrint C3250 6) For a local printer, specify the port to be used. This screen is not displayed for a network printer. 7) A dialog box for specifying the printer name is displayed. To change the printer name, enter any name in the "Printer name" box. If other printers are installed, a message asking whether to set this as the default printer is shown. Click "Yes" if you want to set it as a default printer. 8) A dialog box specifying whether to print the test page after installation is shown. To perform test printing on the print driver, load letter paper to the printer, select "Yes" and then "Next". Select "No" and click "Next" if you do not wish to print the test page. 9) The necessary files are copied and a new printer icon is created. If you have printed the test page, a printer test result confirmation message is displayed. This completes the installation. Next, we set the installed printer options. 10) Click the printer icon. 11) From the "Printer" menu, click "Properties". 12) Click the "Options" tab. Perform the setting when the "Options" tab is displayed. If an ICC profile is required for an user application ------------------------------------------------------ If an ICC profile of this printer is required for an user application and if printing is via this printer driver, use the following ICC profile. DocuPrint C3540 "fxljrjp2.icm" DocuPrint C3140 "fxljrjp1.icm" DocuPrint C3250 "fxljrjp3.icm" ------------------------ 4. Version Improvements ------------------------ This section describes the modifications made for each upgraded version. [Improvements from Ver 2.5.40] * Changed the default value of [Halftone Print]. * Improved the abnormal end issue, which may occur when [Get information from Printer] button is clicked in a situation where a specific paper type is specified on printer side. * Improved the occurrence of not reflecting paper specification correctly through the setting of "Change Paper Information Handling". * Improved the phenomena where specified copies were not reflected correctly when printing from a specific application. * Improved the phenomena of print failure from a particular application. * Corrected the problem that the back cover may not be output under special conditions. * Improved the phenomena where font substitution for bold text and italic text cannot be made correctly. * Improved the phenomena where separators are not output to the correct location when making 2-Sided prints. * Improved the problem that specified paper source from application may be ignored after changing [Ignore Application Paper Source Settings]. * Rectified the problem in configuring setting of paper quality that cannot be assured when using long paper. * Supported "DocuPrint C3250". * Rectified the problem of abnormal termination and hung-up of the application when loading/unloading print driver. * Improved the performance of printing error when specifying unsupported trays in specific application. * Rectified the problem in printing the layout of booklet printing correctly. * Made improvements to the phenomenon where the [Controller ROM Version] is not reflected correctly when retrieving information from the printer. [Improvements from Ver 2.5.54] * Improved the phenomena where the Collated setting was not reflected correctly when printing from specific applications. [Improvements from Ver 2.5.57] * Modified wrong options displayed on "Margin Shift". ---------------- 5. Limitations ---------------- ============================ Driver-Specific Limitations ============================ Notes on Upgrade and Installation ================================== If the standard NetWare client provided by the operating system is used, print driver upgrade and installation may fail. In this case, use the NetWare client by Novell Inc. Shared Printer =============== When the printer driver is installed via a shared printer on Windows 95, 98 or Me, the driver may not be installed correctly. Refer to "3. Installation" and install the driver to the computer following the print instructions. When printing via a shared printer on Windows NT (R) 4.0, if the printer is using the LPR port and "Spool print documents so program finishes printing faster" on the "Advanced" tab is selected, please specify "Start printing after last page is spooled". If you select "Start printing immediately", the results may be different from the screen. Lotus(R) Notes(R) Server ========================= This driver may not be correctly installed when installing from the printer created using the Print Manager on the Lotus(R) Notes(R) server. Refer to "3. Installation" to install this driver on the computer for processing print instructions. Number of Copies ================= This driver allows you to print from 1 to 999 copies. Only one copy will be printed if the number of copies specified exceeds this range. Watermark Printing =================== When performing watermark printing with "Transparent" specified, some of the colors that appear on the screen may be different when actually printed. Print Booklet and Print Header/Footer functions ================================================ When the page number printing is simultaneously specified for Print Booklet function and Print Header/Footer function, the page numbers may not be printed properly. Printing Huge Print Data ========================= For some applications, if a pasted image is printed at high resolution, the print data expands and may result in an extremely slow printing speed. The print data size of the output may be improved by changing the following settings of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. * Change "Resolution". * Change "Image Compression". Black/Color Auto Recognition ============================= When "Color (Auto)" is specified at "Output Color", though the output may appear to be in black, it has been processed in color. If you are sure that you want to print in black, specify "Black" at "Output Color". Documents will be printed in color in the following situations. * When black and white objects are overlapping the color objects * When there are color objects outside the print area * When the application uses the system's ICM function to perform color change * When the application has its own color change function Skip Blank Pages ================= Even with "Skip Blank Pages" selected, blank pages may still be printed in the following situations. * The page contains only line feeds. * The page contains only spaces. * The page contains only line feeds and spaces. * A white background drawing instruction is sent from the application. Favorites ========== When only a margin setting is changed, "Change" is not displayed in the "Favorites" combo box. Printer Error ============== An error may occur at the printer if one of the following situations occurs during printing. Follow the instructions on the printer UI or the user guide to resolve the error. * Driver properties from the application program are not displayed. * Printer settings on the application program are not reflected in the driver properties when displayed. * Printer settings are changed midway in a document. (E.g. document which has different paper sizes for every page.) * Continuous printing from multiple application programs. * When an optional device that was not installed to the printer was specified at the "Options" tab. Compatibility with Printer Font ================================ If a document using the printer fonts of other machine models is printed through this driver, then the results of printing will be different. Print Overlay ============== The alphabetical "Form Name" specified in the "Print Overlay" is case sensitive. Specify the correct case sensitive form name registered in the printer. As some applications paint the background in white to print, forms with overlay may be hidden. Such applications include Internet Explorer and WordPad. =================== Client Environment =================== Multi-language Document ======================== If a multi-language document is created using the multi-language support function, you should select "Always Use TrueType Fonts" on the "Fonts" tab before printing. When printing with printer fonts, non-Japanese texts such as Greek, Croatian, etc. may be printed incorrectly. ================================== Application-Specific Limitations ================================== All Applications ================= * Depending on the application used by the customer, blank pages for page adjustment will be inserted automatically according to the conditions like the number of copies specified when outputting 2-sided prints. In this case, the blank inserts will be included by the application. The performance is improved by changing the setting below. - Check "Skip Blank Pages" on "Advanced Settings" tab. * The print layout may be changed when you change the "Resolution" of this driver. * In some applications, when the line width is set to thin lines, the selected dotted lines may be printed as solid lines instead. If this happens, select another line width. * When printing documents with image data such as photos, the processing time may increase. In such case, the processing time can be reduced by setting the "Image Compression" option of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab to "Photo". * When garbage text is printed, select "Always Use TrueType Fonts" from the "Fonts" tab when printing. * When text is not printed clearly, it can be improved by changing the following setting. * Change the "Print Mode" from the "Graphics" tab. * When a printed pattern or diagram is different from what you see on the screen, changing the following settings of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab may alleviate the problem. * Uncheck the "High Speed Graphics Processing". * Uncheck the "High Speed Image Processing". * Check the "Gray Guaranteed" check box. * Check the "Draw the pattern with fine lines as per the resolution" check box. * Change "Resolution". You can also improved the problem by changing the following setting: * Change the "Print Mode" at the "Graphics" tab. * Change the "Image Adjustment Mode" at the "Graphics" tab. * Change the "Brightness" and "Contrast", "Chroma" at the "Image Settings" tab of the "Graphics Properties" dialog box. * The print result may overlap if Multiple Up is selected when printing a document that has exceeded the print area of the printer driver. * If the Long Paper document is not printed as shown on the screen, it may be improved by setting the "Resolution" to "300dpi" or "200dpi". * Setting the following will improve the phenomena if the paper settings from the application are incorrect. * Modify the "Change Paper Information Handling" setting. * If a printed pattern or diagram is different from what you see on the screen, you can improve the result by changing the following settings in "Other Settings (Graphics Settings)" of the "Detailed Settings" tab. * Set "Halftone Print" to "Off". Adobe(R) Acrobat(R) ==================== Adobe(R) Reader(TM) ==================== Changing the following settings may improve the printing result if the printed output is different from what you see on the screen. * Check the "Print Image" at the print dialog box of the application before printing. When printing a PDF file containing mixed sizes such as A4 portrait and A3 landscape, the printer driver is unable to separate and print pages of different sizes onto different paper in a single operation. To print on different paper sizes, separate the pages of different sizes into different print operations. To fit a mixed-size print output to a single paper size in a single print operation, select "Reduce" on the "Print" dialog box. For example, you can rotate and reduce an A3 landscape page to be printed on an A4 portrait paper. "Turn Image by 180deg" setting will not be reflected on the output result. Adobe(R) Illustrator(R) 9.0 ============================ "Paint" and "Lines" areas specified in the text may be printed incorrectly if printer fonts are used. If this happens, specify "Always Use TrueType Fonts" on the "Fonts" tab in the printer driver. Adobe(R) Illustrator(R) 10.0.3 =============================== When a printed pattern or diagram is different from what you see on the screen, the problem may be improved by changing the settings of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. * Set "Resolution" to "600dpi". * Set "Halftone Print" to "On". Adobe(R) PageMaker(R) ====================== When printing on custom paper, if the printing position has shifted, set "Change Paper Information Handling" to "On" in "Other Settings (Graphics Settings)" in the "Detailed Settings" tab. CorelDRAW(R) ============= If a printed pattern or diagram is different from what you see on the screen, you can improve the result by the following settings. * Change "Print Mode" in the "Graphics" tab. * Change the following settings in "Other Settings (Graphics Settings)" in the "Detailed Settings" tab. - Set "Halftone Print" to "On". - Set "Paint Only Enclosed Areas" to "On". - Set "High Speed Graphics Processing" to "On". Corel(R) DESIGNER(TM) ====================== Objects that are drawn in solid lines may be printed in dotted lines. The print output may not look good, for example, lines and gaps may be seen in circle gradations. The print output may be improved by converting the gradations to images. JUSTSYSTEM(R) Ichitaro(R), Hanako(R) ===================================== When the print output size is huge, the printing time is long and the printout differs from the screen, you may be able to reduce the print output size and improve the printout by changing the following settings: 1. Display the print preview using the "File">"Print" menu. 2. Press the "Options" button to open the option screen. 3. Set the gradation output mode to "Image". Micrografx(R) Designer(TM) 7.0J ================================ Objects that are drawn in solid lines may be printed in dotted lines. The print output may not look good, for example, lines and gaps may be seen in circle gradations. The print output may be improved by converting the gradations to images. Microsoft(R) Excel =================== When printing a book or multiple sheets in Excel, the second and subsequent sheets may not be printed as specified in the dialog settings. When you specify to print an entire book with mixed double-sided and single-sided sheets, each sheet is printed according to its individual print information. Batch printing is not performed. You can avoid this problem by doing the following: 1. Select another printer on the print dialog or page setup dialog of any sheet and close the document temporarily to activate the change. 2. Change the default value of the driver to the desired setting. (E.g. 2 Sided Print, 2 Up, etc.) 3. Open the document and select this driver on the print dialog before printing. The print layout may be changed when you change the "Resolution" of this driver. Microsoft(R) Internet Explorer =============================== When the output of the image data is different from what you see on the screen, use the following method to resolve. * Change the "Resolution" setting of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. If a Web page containing Excel document is printed in multiple parts, you can rectify the problem using the following methods. 1. Quit Internet Explorer. 2. Open printer properties in the Printers folder. 3. Switch "Apply Zoom to Application" to "Off" in the items list of "Other Settings (Graphics Settings)" in the "Detailed Settings" tab. Microsoft(R) PowerPoint(R) =========================== Depending on the font (e.g. MS-Mincho) and point size specified for a piece of text, the underscore (_) and the underline may overlap in the print output. Even if the overlap is not apparent because of the screen display ratio, the underscore (_) and the underline may overlap on the print output. When the output in black is different from what you see on the screen, use the following method to resolve. * Check the "Grayscale" on the Print dialog of the application and print. Microsoft(R) Visio(R) ====================== A document that contains TrueType fonts may not be printed correctly. This problem can be alleviated by replacing the fonts used in the document with the printer fonts on the "Font" tab of the driver. Setting the following will improve the problem of printing subsets of various sizes in which is different from the specified "Paper Size" in "Basic" tab. * Set "Change Paper Information Handling" to "On" on the "Detailed Settings" tab. Microsoft(R) Word ================== Even if "Skip Blank Pages" is specified, when a blank page is included in documents, it may be output. When "Poster" is selected to print two or more copies of a single-page document, the copies will not be collated. Japanese font set with "Outline" (click the "Font" on the "Format" menu to display the "Font" tab) may be printed incorrectly. Fuji Xerox DocuWorks(TM) ========================= When printing a mixed size document, the printer may not be able to switch between different output paper sizes. Such cases can be avoided by the following method. * Display the "Printer Settings" dialog box using the "File"> "Printer Settings" menu. * Specify "Auto" from "Paper Source". -------------- 6. Inquiries -------------- Fuji Xerox Printing Systems Co., Ltd. Printer Support Desk Please check the telephone number to call on the "Maintenance/Operation Inquiries" card pasted on the machine. The latest software is available on our web site. http://download.fujixerox.co.jp/ Communication charges will be borne by the customer. "Microsoft", "PowerPoint", "Windows", "Windows NT" are registered trademarks of Microsoft Corporation, U.S.A. in the United States and other countries. Adobe, Adobe Illustrator, Adobe Acrobat, PageMaker and Adobe Reader are trademarks of Adobe Systems Incorporated. "Corel DESIGNER" is trademark or registered trademark of Corel Corporation. Other company names and product names are trademarks or registered trademarks of the respective companies. This software is based in part on the work of the Independent JPEG Group.