Skip Navigation in page
Skip to global menu
Skip to main content

Country/region:

DocuCentre 707/607/507

- Improved Energy Efficiency from DocuCentre 705/605/505-
January 10, 2002
 
DocuCentre 707 CP
<DocuCentre 707 CP>
 

Achieving an energy consumption level less than half of their predecessors, Fuji Xerox's DocuCentre 707/607/507 series comprise a total of 12 models with print capabilities of 70 ppm, 60 pmm, and 50 ppm (A4 long-edge feed) respectively. The six DocuCentre 707/708/607/608/507/508 copying function models will begin sales from January 10, 2002, and the six DocuCentre multifunction models (copying machine, printer and scanner) including the 707CP/708CP/607CP/608CP/507CP/508CP, will begin sales in late January.

The DocuCentre 707/607/507 series, which incorporate a newly developed Roller-in-Roller fusing system*, has a reduced machine warm up time of just 30 seconds. Models with a copy speed of 50 ppm and 60 ppm use just 80 wh/h, an energy savings of 65 percent over their predecessors, while the 70 ppm (A4 long-edge feed) models use just 125 wh/h, a 53 percent of energy reduction. This is the highest energy savings level for a machine of its class.

The series with a high-speed scanner and printer function** can print at speeds of up to 75 ppm (A4 long-edge feed) with the DADF. When connected to the network***, the user can automatically send a scanned document as an e-mail attachment to a PC by registering its e-mail address, and register the scanned document on the server. This procedure requires no additional software and the document can be easily stored and distributed.

Combined with the optional DADF, the DocuCentre 707/607/507 series can sort copies electronically without requiring a mechanical sorter. It has an optional finisher with puncher for high productivity printing, making it ideal as a core network printer.

*The Roller-in-Roller fusing system unit consists of a heat roller and an inner roller in the outer roller (paper roll), hence Roller-in-Roller. The heat roller itself is just 1/10 the thickness of the previous roller (or 0.5mm) to reduce energy consumption. The use of the inner roller enables the heat roller to maintain the heat pressure applied to the paper to achieve high-quality images.

**The DocuCentre 707/708/607/608/507/508 models require the optional printer/scanner kit

***Requires the optional SDRAM module and hard disk (Available from late January, 2002)

 
Other features include
 
[Environmental friendly features]
 
  • Models comply with the green purchasing law (enacted April 2001)
  • Models are fully recyclable and environmental friendly: The products clear the higher internal standard for the proportion of reused parts and recycled parts in one machine in the manufacturing process.
  • Comply with the International Energy Star Program
  • Low-noise design: the fan is installed on the bottom of the machine so that it is out of contact with the user, adding to the machine is low noise design.
  • Chrome-free steel case: The machines use a completely chrome-free steel case for increased durability and reduced environmental impact.
 
[Copier]
 
  • FCOT: Just 2.7* seconds (A4 long-edge feed) and 3 seconds when using DADF, the fastest level for a copying machine (as of December 5, 2001).
    *2.8 seconds for multifunction machine
  • Reads at a high speed of 75 ppm (A4 long edge feed) using the DADF, which increases document efficiency.
  • Scan while copying: a user can set the next document on the platen and the machine will read the sheet to be copied, while another document is being copied.
  • 700 sheets continuous copying
 
[Printer/Scanner]
 
  • High-speed network scanner: The network scanner scans documents at 75 ppm (A4 long-edge feed and when printing at 200 dpi/300/400 dpi) and boasts high print productivity.
  • The CPU incorporates a PowerPC processor MPC8240 (200 MHz) for printing high volume documents at fast speeds of up to 70 ppm.
  • Mailbox function for scanned documents: scanned documents can be sent to PCs and servers or stored in the machine to be viewed from users' PC.
 
Suggested price (tax excluded)
 
DocuCentre 507 1,910,000 yen
DocuCentre 508 1,950,000 yen
DocuCentre 607 2,310,000 yen
DocuCentre 608 2,350,000 yen
DocuCentre 707 2,830,000 yen
DocuCentre 708 2,870,000 yen
DocuCentre 507 CP 2,250,000 yen
DocuCentre 508 CP 2,290,000 yen
DocuCentre 607 CP 2,650,000 yen
DocuCentre 608 CP 2,690,000 yen
DocuCentre 707 CP 3,170,000 yen
DocuCentre 708 CP 3,210,000 yen
Availability
: Japan
*This product information is for business users and therefore does not include consumption tax.

To download the image of the DocuCentre 707 CP, visit
http://www.fujixerox.co.jp/release/picture/DocuCentre707cp.jpg

 
end of content

Go to TOP